3com Pioneer PRV-LX1 Manuel du propriétaire

Naviguer en ligne ou télécharger Manuel du propriétaire pour Lecteurs de DVD 3com Pioneer PRV-LX1. 3Com Pioneer PRV-LX1 Owner's Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 5
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
PRV-LX1 Quick Start
(Commands using the front panel appear in bold text while Function menu commands appear in bold-italics)
Set Up the PRV-LX1
Connect the PRV-LX1 to a source
device as shown below. For ease of
use, add a monitoring screen to each
device.
The example (right) shows the setup
for Composite Video with RCA Audio.
Select the Recording Inputs & Parameters
To record material from a source device
directly to disc, select a target. Press the
Function button on the PRV-LX1’s front
panel. Using the arrow buttons to highlight
Drive in the Status window. Continue using
the arrow buttons to highlight DVD1 in the
Drive submenu and press Enter until an
orange box (
) appears next to the drive.
Insert a blank DVD disc into the drive.
Note: Another option is to use the front panel to
select DVD1 as the target. If the unit is not already
set to DVD1, press the Drive Select button until
the indicator under DVD1 is lit.
Although the hardware is connected for
Composite, the Video Input source must also
be set to Composite. From the Function
menu, highlight V Input from the Status
window then press Enter. Arrow right to
highlight Composite then press Enter so that
the option is marked with an orange box (
).
PRV-LX1_QuickStart.doc Page 1 of 5
Vue de la page 0
1 2 3 4 5

Résumé du contenu

Page 1 - PRV-LX1 Quick Start

PRV-LX1 Quick Start (Commands using the front panel appear in bold text while Function menu commands appear in bold-italics) Set Up the PRV-LX1 Conne

Page 2

Using the arrow buttons on the front panel, highlight A Input then press Enter. Verify that RCA is highlighted then press Enter to select that op

Page 3 - Build A Menu

Record Your Video Once the encode rates are set, record the video to the disc in DVD1. Press the Function button to exit the Function menu. Press th

Page 4 - Burn & Finalize the Disc

Select the next action after a Title is played. If a menu is available, you can program playback to return to that menu. The other options are to c

Page 5

Finalization times vary depending upon the amount of material being burned to the disc. The drive tray automatically opens when the finalization proc

Commentaires sur ces manuels

Pas de commentaire